|
Custom Curtain Partitions
Enclose virtually any area with Custom Curtain Partitions! Simple to apply, simple to order, simple to install, simple to customize – simply the easiest!
Choose from a variety of curtain materials below, select the hanging hardware and add the sizes. Contact customer support for assistance at any time.
Custom Curtain Material Choices:
Priced by square foot with 10% drapage added to opening width to calculate finished curtain width
| PVC Clear |
Transparent vinyl
CFM approved |
Clear |
.020” |
| Welding PVC |
Transparent vinyl
CFM approved |
Yellow, Green, Blue, Gray, & Orange |
.014” |
| Welding PVC |
Compliant with CPAI-84
CFM approved |
Amber & Red |
.014” |
| Vinyl - Welding |
Vinyl coated fabric
Resists fire, water, mildew, oils, alkalis and most acids |
Opaque
Yellow & Green |
16 oz. |
| Vinyl |
Vinyl coated fabric |
Opaque
Black, Blue, Red, Green, Yellow, Grey & White |
19 oz. |
| Canvas |
Medium weight
CFM approved
Resists fire, water & mildew |
Opaque
Blue, Yellow & Green |
16 oz. |
Custom Curtain Material Options:
- Hemmed Weight Chain - 3/16" chain sewn into bottom of curtain
- Extra Grommets - Included as standard at 12" centers along top and one in each bottom corner.
- Velcro Attachment - 1" wide black (includes both sides)
Typical Curtain Design Layout Example:
Use the following as a guide to determine specific requirements.
Typical Custom Curtain Mounting Styles & Hardware:
A) Ceiling Mounting
| MOST COMMONLY USED CEILING MOUNT COMPONENTS |
 |
Straight Track
Supplied in 10’ long sections tied together with appropriate connector/support.
|
T-880 |
foot |
 |
Straight Connector
Used to connect track sections where support is not required.
|
SC-005 |
each |
 |
Two Wheel Nylon Roller
Used for most light to medium duty applications.
To calculate the number of rollers needed use the following formula:
Finished Curtain Width (rounded up to next highest foot) + 1 = # of rollers required
|
(2") NRO-15
(2.5") NRO-17 |
Each |
 |
Two Wheel Steel Roller
Used for heavier duty applications.
To calculate the number of rollers needed use the following formula:
Finished Curtain Width (rounded up to next highest foot) + 1 = # of rollers required
|
(2") SRO-16
(2.5") SRO-18 |
Each |
 |
Wall End Support (up)
Used to close the open ends of track and support track against the wall. EW-006 is used when clearance above the track is available for installation.
|
EW-006 |
Each |
 |
Wall End Support (down)
Used to close the open ends of track and support track against the wall. EW-007 is used when clearance below the track is available for installation.
|
EW-007 |
Each |
 |
End Stop
Used to close the open ends of track sections and stop rollers from falling out of the track.
|
ES-010 |
Each |
 |
Ceiling Straight Connector
Used to connect track sections and provide ceiling anchored track support at 5’ centers.
|
CS-008 |
Each |
 |
Ceiling 90 Deg. Curved Track
Used to create a curve and is anchored into ceiling. Includes end connectors.
|
CC-012 |
Each |
 |
Ceiling 90 Deg. Corner Connector
Used to create a corner intersection and provide ceiling anchored track support.
|
CAC-034 |
each |
 |
Ceiling 3-Way “T” Connector
Used to create a corner T intersection and provide ceiling anchored track support.
|
CTC-035 |
each |
Back to top
B) Wall Mounting
| MOST COMMONLY USED WALL MOUNT COMPONENTS |
 |
Straight Track
Supplied in 10’ long sections tied together with appropriate connector/support.
|
T-880 |
foot |
| |
Straight Connector
Used to connect track sections where support is not required.
|
SC-005 |
each |
 |
Straight Wall Connector/Support
Used to connect track sections and provide support at 5’ centers.
|
WM-004 |
each |
| |
Two Wheel Nylon Roller
Used for most light to medium duty applications.
To calculate the number of rollers needed use the following formula:
Finished Curtain Width (rounded up to next highest foot) + 1 = # of rollers required
|
(2") NRO-15
(2.5") NRO-17 |
Each |
| |
Two Wheel Steel Roller
Used for heavier duty applications.
To calculate the number of rollers needed use the following formula:
Finished Curtain Width (rounded up to next highest foot) + 1 = # of rollers required
|
(2") SRO-16
(2.5") SRO-18 |
Each |
| |
End Stop
Used to close the open ends of track sections and stop rollers from falling out of the track.
|
ES-010 |
Each |
Back to top
C) Beam Mounting
| MOST COMMONLY USED BEAM MOUNT COMPONENTS |
|
Straight Track
Supplied in 10’ long sections tied together with appropriate connector/support.
|
T-880 |
foot |
 |
Beam Straight Connector
Used to connect track sections at 5’ centers. Note: “Beam” can be chain, threaded rod, tubular steel, etc. and is by others.
|
BS-009 |
each |
|
Straight Connector
Used to connect track sections where support is not required.
|
SC-005 |
each |
|
Two Wheel Nylon Roller
Used for most light to medium duty applications.
To calculate the number of rollers needed use the following formula:
Finished Curtain Width (rounded up to next highest foot) + 1 = # of rollers required
|
(2") NRO-15
(2.5") NRO-17 |
Each |
|
Two Wheel Steel Roller
Used for heavier duty applications.
To calculate the number of rollers needed use the following formula:
Finished Curtain Width (rounded up to next highest foot) + 1 = # of rollers required
|
(2") SRO-16
(2.5") SRO-18 |
Each |
|
End Stop
Used to close the open ends of track sections and stop rollers from falling out of the track.
|
ES-010 |
Each |
|
Wall End Support (up)
Used to close the open ends of track and support track against the wall. EW-006 is used when clearance above the track is available for installation.
|
EW-006 |
Each |
|
Wall End Support (down)
Used to close the open ends of track and support track against the wall. EW-007 is used when clearance below the track is available for installation.
|
EW-007 |
Each |
 |
Beam 90 Deg. Curved Track
Used to create a curve and provide “Beam” style anchored support. Includes end connectors. Note: “Beam” can be chain, threaded rod, tubular steel, etc. and is by others.
|
CB-014 |
each |
 |
Beam 90 Deg. Corner Connector
Used to create a corner intersection and provide “Beam” style anchored support. Note: “Beam” can be chain, threaded rod, tubular steel, etc. and is by others.
|
BAC-031 |
each |
 |
Beam 3-Way “T” Connector
Used to create a corner T intersection and provide “Beam” style anchored support. Note: “Beam” can be chain, threaded rod, tubular steel, etc. and is by others.
|
BTC-032 |
each |
Back to top
D) Floor Mounting
| MOST COMMONLY USED FLOOR MOUNT COMPONENTS |
|
Straight Track
Supplied in 10’ long sections tied together with appropriate connector/support.
|
T-880 |
foot |
 |
Floor Straight Connector
Used in conjunction with columns and support bases to support track at 5’ centers.
|
FS-011 |
each |
|
Straight Connector
Used to connect track sections where support is not required.
|
SC-005 |
each |
|
Two Wheel Nylon Roller
Used for most light to medium duty applications.
To calculate the number of rollers needed use the following formula:
Finished Curtain Width (rounded up to next highest foot) + 1 = # of rollers required
|
(2") NRO-15
(2.5") NRO-17 |
Each |
|
Two Wheel Steel Roller
Used for heavier duty applications.
To calculate the number of rollers needed use the following formula:
Finished Curtain Width (rounded up to next highest foot) + 1 = # of rollers required
|
(2") SRO-16
(2.5") SRO-18 |
Each |
|
End Stop
Used to close the open ends of track sections and stop rollers from falling out of the track.
|
ES-010 |
Each |
|
Wall End Support (up)
Used to close the open ends of track and support track against the wall. EW-006 is used when clearance above the track is available for installation.
|
EW-006 |
Each |
|
Wall End Support (down)
Used to close the open ends of track and support track against the wall. EW-007 is used when clearance below the track is available for installation.
|
EW-007 |
Each |
 |
Floor Mount Support Base
(Plate 12” x 12”)
Anchored into floor and used in conjuction with columns and connectors to support track at 5’ centers.
|
FMB-040 |
Each |
 |
Floor Mount Support Column
Used in conjunction with connectors and support bases to support track at 5’ centers.
|
FMC-046 (6’)
FMC-047 (7’)
FMC-048 (8’) |
Each |
 |
Floor 90 Deg. Curved Track
Used to create a curve in conjunction with columns and support bases. Includes end connectors.
|
CF-015 |
Each |
 |
Floor 90 Deg. Corner Connector
Used to create a corner intersection in conjunction with columns and support bases.
|
FAC-037 |
Each |
 |
Floor 3-Way “T” Connector
Used to create a corner T intersection in conjunction with columns and support bases.
|
FTC-038 |
Each |
Back to top
|
